| Max.Head: | >150m |
|---|---|
| Max.Capacity: | >400 L/min |
| Driving Type: | Hydraulically Driven |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 1. Flow rate:Q= 420~2600 m³/h
2. Total Head:H=120~640 m
3. Speed:n=2970 r/min
4. Temperature:T=-20~250 ºC
Features:
1. Products comply with API610 standards, shaft seal system meets the API682 standard.
2. With thickened heavy shaft design, strong shaft and bearing loading ability, long service life.
3. With high turbine efficiency and full energy recovery.
4. The turbine and the load are direct drive, with small occupied area and low investment and maintenance costs.
5. DCS control is simple and reliable.
6. The turbine can be safe operation when it gets over 10% of the rated speed, and the system can fully recover the surplus energy.
7. There are many flushing options for mechanical seal and selecting the domestic famous manufacturers of mechanical seal with reliable sealing and long service life.
8. Turbine is stable operation with low noise.
Structure:
1. ZHT hydraulic turbine is divided into three types:
(1) ZHT single stage single suction cantilever center support type OH2 structure;
(2) ZHT (S) single stage double suction type BB2 structure;
(3) ZHT (D) multistage single suction self balance center support type BB4 structure.
2. All turbines are upper-inlet and upper-outlet.
3. All turbines are center support suitable for high temperature medium.
4. All bearings adopt water cooling structure, to improve the service life of bearings.
Structure drawing is as below
Structure drawing of type ZHT (OH2)
1. Outlet elbow 2. Pump body 3. Impeller nut 4. Seal ring 5. Impeller 6. Pump cover 7. Mechanical seal 8. Front bearing cover 9. Front bearing 10. Bracket 11. Shaft 12. Back bearing 13. Back bearing cover 14. Round nut 15. Suspension support 16. Cooling pipe 17. Oil leveler 18. Pump body support
Structure drawing of type ZHT(S) (BB3)
1. Bearing cover 2. Bearing 3. Bearing box 4. Middle fame 5. Pump body 6. Seal ring 7. Impeller 8. Shaft sleeve 9. Mechanical seal 10. Dust-proof plate 11. Shaft 12. Round nut 13. Oil extraction ring sleeve 14. Oil extraction ring 15. Bearing 16. Oil sling shaft sleeve 17. Throttling sleeve 18. Pump support
Structure drawing of type ZHT(D) (BB4)
1. Dust-proof plate 2. Bearing cover 3. Bearing body 4. Bearing 5. Discharge section 6. Mechanical seal 7. Throttling ring 8. Middle section 9. Water diversion pipe 10. Inlet section 11. Guide vane 12. Discharge section 13. Support 14. Bearing cover 15. Oil flinger 16. Return pipe 17. Inlet elbow 18. Turbine support 19. Mechanical seal house 20. Spiral sleeve 21. Throttling sleeve at high voltage end 22. Seal ring 23. Impeller throttling ring 24. Impeller 25. Middle spiral sleeve 26. Middle throttling sleeve 27. Final-stage guide vane 28. Middle shaft sleeve 29. Snap ring 30. Shaft
Material of construction:
API610 standard grade:
C-6
A-7
A-8
D-1
D-2
And other material combination.
Configuration:
Application:
ZHT single drive hydraulic turbine is suitable for delivering pure liquid or with small amount of small particles, neutral or corrosive medium. Mainly used:
1. Decarbonization process of synthetic ammonia unit
2. Desulfurization unit of natural gas purification plant
3. Residuum hydro desulfurization unit in refinery
4. Hydrocracking of high pressure hydrogenation unit in petrochemical plant
5. Residual pressure recovery device of reverse osmosis desalination system
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}