Brief introduction:
CQB-F type fluorine plastic/PTFE lining magnetic drive pump is a new product with no leakage and high temperature resistance and strong corrosion resistance. It adopts PTFE forming technology and has unique properties due to its strong corrosion resistant medium. The inner lining of various cast iron, carbon steel, stainless steel inner wall and pump body can not only be used for strong corrosive media under different working conditions, but also can replace expensive rare metals.
Parameters:
| Flow rate: |
Q= 0.6~100 (m³/h) |
| Total head: |
H=2~50 (m) |
| Pump speed: |
n=1450/2900rpm |
| Design temperature: |
T=-20~180ºC |
| Fluid s.g.: |
γ≤1.85 |
| Pump diameter: |
50~350mm |
Features:
1 The pump inner lining, the inner rotor of the impeller, and the isolation sleeve are all molded by pure F46 material, and no impurities are precipitated.
2. The shaft seal design of the traditional centrifugal pump was cancelled. Indirect drive with magnetic coupling to achieve zero leakage. It is very suitable for special occasions such as medicine, chemical, aviation, and standard workshops.
3. Fluorine-lined pump casing adopts high temperature annealing technology. The fluorine layer of the pump body is tightly fitted, and the fluorine is smooth and the strength is high. Very suitable for use in strong acid and alkali conditions.
4. Magnetic steel uses special materials, never demagnetizes, can smoothly transfer the torque of the prime mover to the impeller, and will not slip under large flow conditions, and can prevent the inner rotor of the impeller from contacting the rear thrust ring, thus preventing Melting fluorine plastic parts due to frictional heat, ensuring that the magnetic pump can operate normally in highly corrosive conditions;
5. The isolation sleeve is made of imported carbon fiber. It has ultra-high overpressure performance, which makes the pump set can withstand higher system pressure and can eliminate the heat generated by the metal sleeve due to magnetic eddy current;
6. Impeller rotor has the characteristics of high strength, non-deformation, corrosion resistance, smooth flow path, superior water conservancy performance, small hydraulic friction loss and high efficiency.
Configuration:
Application:
CQB-F type fluorine plastic/PTFE lining magnetic drive pump is widely used in Chlor-alkali, Chlorobenzene, Chemical Foil, Pickling, Pesticide, Pharmaceutical, etc.
We also supply:
CQB series fluorine plastic alloy magnetic pump IMD series fluorine plastic alloy magnetic pump
ZMD series self-priming magnetic pump UHB-ZK series mortar pump
FZB series fluorine plastic alloy self-priming pump FSB(L) series fluorine plastic alloy centrifugal pump
FYH series fluorine plastic alloy submerged pump MFY-I series wear and corrosion resistant pump
GDF series fluorine interlined pipe pump Different fluorine interlined valves,sight glass,pipes and fittings.
){kind=link}
){kind=link}