Biref introduction:
The fluorine plastic axial flow pump is the flow parts of the horizontal elbow axial flow pump lined with PFA to achieve the purpose of corrosion prevention, which is specially used for conveying strong corrosive medium such as strong acid and alkali at large capacity and low head. PFA has the strongest corrosion resistance and can resist almost all the corrosion of strong acids, strong bases, strong oxidants, reducing agents and various organic solvents, and is the most used lining material. PFA lining axial flow pumps could cope with severe working conditions of high temperature and high pressure, low temperature and negative pressure, chemical process temperature sudden change, and resist strong corrosive medium.
Parameters:
| Flow rate: |
Q=50~530(m³/h) |
| Total head: |
H=8~1.5 (m) |
| Speed: |
n=180~1450rpm |
| Fluid s.g.: |
γ ≤1.5 |
| Fluid temperature: |
T=0~160ºC |
| Fluid viscosity: |
ν ≤600(mm2/s) |
Structure:
- Elbow structure for pump body,piece-welded body and casted body for selection.
- Pump impeller is cantilever type with spherical hub,impeller blades are adjustable.
- Pump shaft adopts butt welding workmanship,the wetted parts or possible wetted parts are made from stainless steel or other corrosive materials.
- Mechanical seal and packing seal can be interchangeable.
- Adopting cartridge mechanical seal,reliable and easy for maintenance.
- Enlarged cylinder type bearing housing with oil level glass and oil filler,which extends the bearing life and interval of lubricant changing.
- Pump and be driven by motor through V-belts,gear box or directly through couplings. For pipe hung pump,the universal joint transmission must be adopted if the motor ≥200kW.
Structure drawing is as below
The instruction of installation methods:
K suspended installation
The pump and motor are totally articulated, the pump and motor are no need basis, and there are no expansion joint and transport by the triangle belt. The caliber is 300~500mm, only the motor affiance is under 55kw have this installation type.
E half suspended installation
There are no basis at the installation scene, and the pipe bear the weight of pump body. You'd better design a floatable bearing for the pump that caliber≥700 at the horizontal direction and the connection pipe. We only recommend triangular belt transmission and gamble transmission, no expansion joint in the pipe connected with the pump.
F horizontal installation
The base plate is needed when install pump and motor. If the working condition is high temperature, the pipe connected with the pump body need the expansion joint, the pump and motor could translated by the triangular belt of directly transmission.
Configuration:
Applications:
- Salt-making force circulation pump
- Sodium sulfate force circulation pump
- Aluminum oxide force circulation pump
- Sugar-making force circulation pump
- Chlorine alkali force circulation pump
- MVR water treatment force circulation pump
Performance:
){kind=link}